commit 2a8f2ca4c4cc20fa2948d67ee4f5d017bba73df3
Author: Artemiy Solopov <a.solopov.001@gmail.com>
Date:   Sat Sep 12 18:15:20 2026 +0300

    Shared Compose file and Artemis config

diff --git a/README.md b/README.md
new file mode 100644
index 0000000..1333ed7
--- /dev/null
+++ b/README.md
@@ -0,0 +1 @@
+TODO
diff --git a/compose.shared.yml b/compose.shared.yml
new file mode 100644
index 0000000..c6cbf9b
--- /dev/null
+++ b/compose.shared.yml
@@ -0,0 +1,12 @@
+name: neon_vertigo_shared
+
+services:
+  apache-artemis:
+    image: apache/artemis:latest-alpine
+    ports:
+      - "1883:1883"
+      - "61616:61616"
+      - "8161:8161"
+    profiles: ["shared"] # So that we only run one during the "separate" dev
+    volumes:
+      - ./config/artemis:/var/lib/artemis-instance/etc-override
diff --git a/config/artemis/artemis-roles.properties b/config/artemis/artemis-roles.properties
new file mode 100644
index 0000000..080f347
--- /dev/null
+++ b/config/artemis/artemis-roles.properties
@@ -0,0 +1,20 @@
+## ---------------------------------------------------------------------------
+## Licensed to the Apache Software Foundation (ASF) under one or more
+## contributor license agreements.  See the NOTICE file distributed with
+## this work for additional information regarding copyright ownership.
+## The ASF licenses this file to You under the Apache License, Version 2.0
+## (the "License"); you may not use this file except in compliance with
+## the License.  You may obtain a copy of the License at
+##
+## http://www.apache.org/licenses/LICENSE-2.0
+##
+## Unless required by applicable law or agreed to in writing, software
+## distributed under the License is distributed on an "AS IS" BASIS,
+## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+## See the License for the specific language governing permissions and
+## limitations under the License.
+## ---------------------------------------------------------------------------
+
+amq = artemis
+admin = artemis
+message = api,service,web
diff --git a/config/artemis/artemis-users.properties b/config/artemis/artemis-users.properties
new file mode 100644
index 0000000..a2b045f
--- /dev/null
+++ b/config/artemis/artemis-users.properties
@@ -0,0 +1,12 @@
+## ---------------------------------------------------------------------------
+# Majorly generated by Artemis itself, adjusted/changed as needed
+# The container needs to be recreated after this file is changed
+# ---------------------------------------------------------------------------
+
+artemis = ENC(1024:FDA78179C08CE02C4D286ABF3E636282634A308EF7D2627CBE29C92FC6786FD7:00DBC6660262EE555E96153AC5E99FE7A02CE02806C2788ACDF255615A486473DA9437DAD6D14E2E42A7B1A0F1708B4BAF78BA2B36F30BE4CC582E95AD3AA159)
+# Username: api, password: password
+api = ENC(1024:5DB22471388C134FB4945AC9FBB423690A676072B0A62A9272E5C093635BC410:2633D205150921787171E535F6086DBC870BCEF1C473DC1D8B7F8845A4B451DD5485A222D591E79157D468DDD213287A4B4EE9EAA37D078679027A5F430D0D19)
+# Username: service, password: password
+service = ENC(1024:AF978E11BBB84586548F05F7738C114925A34DFCF616E013373DDCBAF4EAA2A5:4ACFB4B439B4FFCD5BFA8973126822A1C4681E54476D784AF733C987E2DF53D8C68B643BB7EA5244E5C3B05FC29410DF275FDC8C4436F08E1596B0FFC04170AF)
+# Username: web, password: password
+web = ENC(1024:8F40F723430B156E7C976AF4E99588D6A4C4A31FA20492667770B07C5F5D1AA4:F11F0CA875FEA7174D86CCFAF286D2941159A7F81085A5A7C00FCE89C9E5C8A55D7461C38141CAB1BE4739BF50CE3E884354FB5075BBBCA1D0D83DBED0E86BC7)
diff --git a/config/artemis/broker.xml b/config/artemis/broker.xml
new file mode 100644
index 0000000..7e5a3ed
--- /dev/null
+++ b/config/artemis/broker.xml
@@ -0,0 +1,290 @@
+<?xml version='1.0'?>
+<!--
+Licensed to the Apache Software Foundation (ASF) under one
+or more contributor license agreements.  See the NOTICE file
+distributed with this work for additional information
+regarding copyright ownership.  The ASF licenses this file
+to you under the Apache License, Version 2.0 (the
+"License"); you may not use this file except in compliance
+with the License.  You may obtain a copy of the License at
+
+  http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing,
+software distributed under the License is distributed on an
+"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+KIND, either express or implied.  See the License for the
+specific language governing permissions and limitations
+under the License.
+-->
+
+<!-- Primarily generated by Artemis, modified as needed  -->
+<!-- The container needs to be recreated after this file is changed -->
+
+<configuration xmlns="urn:activemq"
+               xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+               xmlns:xi="http://www.w3.org/2001/XInclude"
+               xsi:schemaLocation="urn:activemq /schema/artemis-configuration.xsd">
+
+   <core xmlns="urn:activemq:core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+         xsi:schemaLocation="urn:activemq:core ">
+
+      <name>0.0.0.0</name>
+
+
+      <persistence-enabled>true</persistence-enabled>
+
+      <!-- It is recommended to keep this value as 1, maximizing the number of records stored about redeliveries.
+           However if you must preserve state of individual redeliveries, you may increase this value or set it to -1 (infinite). -->
+      <max-redelivery-records>1</max-redelivery-records>
+
+      <!-- this could be ASYNCIO, MAPPED, NIO
+           ASYNCIO: Linux Libaio
+           MAPPED: mmap files
+           NIO: Plain Java Files
+       -->
+      <journal-type>ASYNCIO</journal-type>
+
+      <!-- Set this attribute to true to enable the system to purge the paging folder once it exits the paging state -->
+      <purge-page-folders>false</purge-page-folders>
+
+      <paging-directory>data/paging</paging-directory>
+
+      <bindings-directory>data/bindings</bindings-directory>
+
+      <journal-directory>data/journal</journal-directory>
+
+      <large-messages-directory>data/large-messages</large-messages-directory>
+
+      
+      <!-- if you want to retain your journal uncomment this following configuration.
+
+      This will allow your system to keep 7 days of your data, up to 10G. Tweak it accordingly to your use case and capacity.
+
+      it is recommended to use a separate storage unit from the journal for performance considerations.
+
+      <journal-retention-directory period="7" unit="DAYS" storage-limit="10G">data/retention</journal-retention-directory>
+
+      You can also enable retention by using the argument journal-retention on the `artemis create` command -->
+
+
+
+      <journal-datasync>true</journal-datasync>
+
+      <journal-min-files>2</journal-min-files>
+
+      <journal-pool-files>10</journal-pool-files>
+
+      <journal-device-block-size>4096</journal-device-block-size>
+
+      <journal-file-size>10M</journal-file-size>
+      
+      <!--
+       This value was determined through a calculation.
+       Your system could perform 20.83 writes per millisecond
+       on the current journal configuration.
+       That translates as a sync write every 48000 nanoseconds.
+
+       Note: If you specify 0 the system will perform writes directly to the disk.
+             We recommend this to be 0 if you are using journalType=MAPPED and journal-datasync=false.
+      -->
+      <journal-buffer-timeout>48000</journal-buffer-timeout>
+
+
+      <!--
+        When using ASYNCIO, this will determine the writing queue depth for libaio.
+       -->
+      <journal-max-io>4096</journal-max-io>
+      <!--
+        You can verify the network health of a particular NIC by specifying the <network-check-NIC> element.
+         <network-check-NIC>theNicName</network-check-NIC>
+        -->
+
+      <!--
+        Use this to use an HTTP server to validate the network
+         <network-check-URL-list>http://www.apache.org</network-check-URL-list> -->
+
+      <!-- <network-check-period>10000</network-check-period> -->
+      <!-- <network-check-timeout>1000</network-check-timeout> -->
+
+      <!-- this is a comma separated list, no spaces, just DNS or IPs
+           it should accept IPV6
+
+           Warning: Make sure you understand your network topology as this is meant to validate if your network is valid.
+                    Using IPs that could eventually disappear or be partially visible may defeat the purpose.
+                    You can use a list of multiple IPs, and if any successful ping will make the server OK to continue running -->
+      <!-- <network-check-list>10.0.0.1</network-check-list> -->
+
+      <!-- use this to customize the ping used for ipv4 addresses -->
+      <!-- <network-check-ping-command>ping -c 1 -t %d %s</network-check-ping-command> -->
+
+      <!-- use this to customize the ping used for ipv6 addresses -->
+      <!-- <network-check-ping6-command>ping6 -c 1 %2$s</network-check-ping6-command> -->
+
+
+
+
+      <!-- how often we are looking for how many bytes are being used on the disk in ms -->
+      <disk-scan-period>5000</disk-scan-period>
+
+      <!-- once the disk hits this limit the system will block, or close the connection in certain protocols
+           that won't support flow control. -->
+      <max-disk-usage>90</max-disk-usage>
+
+      <!-- should the broker detect dead locks and other issues -->
+      <critical-analyzer>true</critical-analyzer>
+
+      <critical-analyzer-timeout>120000</critical-analyzer-timeout>
+
+      <critical-analyzer-check-period>60000</critical-analyzer-check-period>
+
+      <critical-analyzer-policy>HALT</critical-analyzer-policy>
+
+      
+      <page-sync-timeout>1608000</page-sync-timeout>
+
+
+      <!-- the system will enter into page mode once you hit this limit. This is an estimate in bytes of how much the messages are using in memory
+
+      The system will use half of the available memory (-Xmx) by default for the global-max-size.
+      You may specify a different value here if you need to customize it to your needs.
+
+      <global-max-size>100Mb</global-max-size> -->
+
+      <!-- the maximum number of messages accepted before entering full address mode.
+           if global-max-size is specified the full address mode will be specified by whatever hits it first. -->
+      <global-max-messages>-1</global-max-messages>
+
+      <acceptors>
+
+         <!-- useEpoll means: it will use Netty epoll if you are on a system (Linux) that supports it -->
+         <!-- amqpCredits: The number of credits sent to AMQP producers -->
+         <!-- amqpLowCredits: The server will send the # credits specified at amqpCredits at this low mark -->
+         <!-- amqpDuplicateDetection: If you are not using duplicate detection, set this to false
+                                      as duplicate detection requires applicationProperties to be parsed on the server. -->
+         <!-- amqpMinLargeMessageSize: Determines how many bytes are considered large, so we start using files to hold their data.
+                                       default: 102400, -1 would mean to disable large message control -->
+
+         <!-- Note: If an acceptor needs to be compatible with HornetQ and/or Artemis 1.x clients add
+                    "anycastPrefix=jms.queue.;multicastPrefix=jms.topic." to the acceptor url.
+                    See https://issues.apache.org/jira/browse/ARTEMIS-1644 for more information. -->
+
+
+         <!-- Acceptor for every supported protocol -->
+         <acceptor name="artemis">tcp://0.0.0.0:61616?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;amqpMinLargeMessageSize=102400;protocols=CORE,AMQP,STOMP,HORNETQ,MQTT,OPENWIRE;useEpoll=true;amqpCredits=1000;amqpLowCredits=300;amqpDuplicateDetection=true;supportAdvisory=false;suppressInternalManagementObjects=false</acceptor>
+
+         <!-- AMQP Acceptor.  Listens on default AMQP port for AMQP traffic.-->
+         <acceptor name="amqp">tcp://0.0.0.0:5672?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=AMQP;useEpoll=true;amqpCredits=1000;amqpLowCredits=300;amqpMinLargeMessageSize=102400;amqpDuplicateDetection=true</acceptor>
+
+         <!-- STOMP Acceptor. -->
+         <acceptor name="stomp">tcp://0.0.0.0:61613?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=STOMP;useEpoll=true</acceptor>
+
+         <!-- HornetQ Compatibility Acceptor.  Enables HornetQ Core and STOMP for legacy HornetQ clients. -->
+         <acceptor name="hornetq">tcp://0.0.0.0:5445?anycastPrefix=jms.queue.;multicastPrefix=jms.topic.;protocols=HORNETQ,STOMP;useEpoll=true</acceptor>
+
+         <!-- MQTT Acceptor -->
+         <acceptor name="mqtt">tcp://0.0.0.0:1883?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=MQTT;useEpoll=true</acceptor>
+
+      </acceptors>
+
+
+      <security-settings>
+         <security-setting match="#">
+            <permission type="createNonDurableQueue" roles="amq, admin, message"/>
+            <permission type="deleteNonDurableQueue" roles="amq"/>
+            <permission type="createDurableQueue" roles="amq, admin, message"/>
+            <permission type="deleteDurableQueue" roles="amq"/>
+            <permission type="createAddress" roles="amq, admin, message"/>
+            <permission type="deleteAddress" roles="amq"/>
+            <permission type="consume" roles="amq, admin, message"/>
+            <permission type="browse" roles="amq"/>
+            <permission type="send" roles="amq, admin, message"/>
+         </security-setting>
+         <security-setting match="activemq.management.#">
+            <permission type="manage" roles="amq"/>
+            <permission type="createNonDurableQueue" roles="amq"/>
+            <permission type="deleteNonDurableQueue" roles="amq"/>
+            <permission type="createAddress" roles="amq"/>
+            <permission type="deleteAddress" roles="amq"/>
+            <permission type="consume" roles="amq"/>
+            <permission type="send" roles="amq"/>
+         </security-setting>
+      </security-settings>
+
+      <address-settings>
+         <!-- if you define auto-create on certain queues, management has to be auto-create -->
+         <address-setting match="activemq.management.#">
+            <dead-letter-address>DLQ</dead-letter-address>
+            <expiry-address>ExpiryQueue</expiry-address>
+            <redelivery-delay>0</redelivery-delay>
+            <!-- with -1 only the global-max-size is in use for limiting -->
+            <max-size-bytes>-1</max-size-bytes>
+            <message-counter-history-day-limit>10</message-counter-history-day-limit>
+            <address-full-policy>PAGE</address-full-policy>
+            <auto-create-queues>true</auto-create-queues>
+            <auto-create-addresses>true</auto-create-addresses>
+         </address-setting>
+         <!--default for catch all-->
+         <address-setting match="#">
+            <dead-letter-address>DLQ</dead-letter-address>
+            <expiry-address>ExpiryQueue</expiry-address>
+            <redelivery-delay>0</redelivery-delay>
+
+            <message-counter-history-day-limit>10</message-counter-history-day-limit>
+            <address-full-policy>PAGE</address-full-policy>
+            <auto-create-queues>true</auto-create-queues>
+            <auto-create-addresses>true</auto-create-addresses>
+            <auto-delete-queues>false</auto-delete-queues>
+            <auto-delete-addresses>false</auto-delete-addresses>
+
+            <!-- The size of each page file -->
+            <page-size-bytes>10M</page-size-bytes>
+
+            <!-- When we start applying the address-full-policy, e.g paging -->
+            <!-- Both are disabled by default, which means we will use the global-max-size/global-max-messages  -->
+            <max-size-bytes>-1</max-size-bytes>
+            <max-size-messages>-1</max-size-messages>
+
+            <!-- When we read from paging into queues (memory) -->
+
+            <max-read-page-messages>-1</max-read-page-messages>
+            <max-read-page-bytes>20M</max-read-page-bytes>
+
+            <!-- Limit on paging capacity before starting to throw errors -->
+
+            <page-limit-bytes>-1</page-limit-bytes>
+            <page-limit-messages>-1</page-limit-messages>
+          </address-setting>
+      </address-settings>
+
+      <addresses>
+         <address name="DLQ">
+            <anycast>
+               <queue name="DLQ" />
+            </anycast>
+         </address>
+         <address name="ExpiryQueue">
+            <anycast>
+               <queue name="ExpiryQueue" />
+            </anycast>
+         </address>
+
+      </addresses>
+
+
+      <!-- Uncomment the following if you want to use the Standard LoggingActiveMQServerPlugin pluging to log in events
+      <broker-plugins>
+         <broker-plugin class-name="org.apache.activemq.artemis.core.server.plugin.impl.LoggingActiveMQServerPlugin">
+            <property key="LOG_ALL_EVENTS" value="true"/>
+            <property key="LOG_CONNECTION_EVENTS" value="true"/>
+            <property key="LOG_SESSION_EVENTS" value="true"/>
+            <property key="LOG_CONSUMER_EVENTS" value="true"/>
+            <property key="LOG_DELIVERING_EVENTS" value="true"/>
+            <property key="LOG_SENDING_EVENTS" value="true"/>
+            <property key="LOG_INTERNAL_EVENTS" value="true"/>
+         </broker-plugin>
+      </broker-plugins>
+      -->
+
+   </core>
+</configuration>